Відео

I have this machine! It’s so cool that you can sew on so many different thicknesses and types of fabric! I’ve been playing around with mine and it seemed to do anything so long as I was using the right needle, but this is so cool!! I’ve always used my grandmothers machine, it’s a big old plastic thing. Couldn’t handle anything. Only did cotton and stuff. This? Leagues ahead.

I got a kenmore from my neighbor. It still has the original guidebook and feet for it. It was back in the late 1940’s to early 1950’s. I recently got it fixed up and god I Adore this machine!

Have you ever heard of a white straight stitcher model 7013? I am thinking of adding this model which is a straight stitcher to my collection but never see one like it on you tube or on the lists of models for White websites.

I have a 6759 white in a cabinet i dont think it was used much i cleaned an oiled her up, she sews like a dream, where would be a good source for parts

Hello. I found your videos. I have a vintage machine, and I liked to take it to you ( if you are near ☺️) I’m leaving in los Angeles.

Can you show how to re assemble and order the clutch release? Mine has a small piece of leather inside that goes in two slots and its very confusing because now my needle will not move.

Thanks so much this is my machine I’m trying to work out

This is great, and an enormous help. Is sewing machine oil simply what is otherwise sold as "mineral oil?" I have been told that - and it's available less expensively in bulk - but I can't find what sort of petroleum the trade name sewing oils are.

Thank you for being a “tinker”. Appreciate your videos. Wish we could see you once in awhile. I understand if you’d rather not reveal yourself. I am 66 live in Florida and at present own 3 featherweights and most recently acquired a singer 201-2 in a wood cabinet with knee peddle for a good deal at $60.00. It was serviced and rewired in 1991. I gave it a good oiling and cleaning. She ran beautifully. Oh I also own from my teenage days a sears kenmore with cams. That baby has been miles I’m telling you!!! Often have said I wished it had a speedometer to see how far it’s been. Still going!

I bought a necchi esperia. The manual says 59 on the back. I just had the motor serviced since it smelled bad when operating, and the necchi fb page suggested it. He said it was bone dry. I have barely used it at all since I don't know how to sew yet, haven't used at all since getting motor back last week, because I need to get the handwheel off. I didn't know about oiling the motor and the manual doesn't mention oiling the motor at all. He told me to put one drop on each side Every Time I sew. I've heard otherwise since, and would like to know the truth please. My motor looks very similar to the one in your video. Thanks.

The daring feet explanation was as clear as mud. What are the arms on them for?

hello my needle is stucked at the left fo you know how to fix it?

I have the White 455 and pulled the last thread guide off when my fingernail got caught in it while I was sewing as I was trying to remove my fabric. Is that that coiled silver guide sawdered to the shank? Is this going to be easy to replace or attach? Your video was great by the way!

Hi I have a 99K how do I find someone to service it?

Needles and the lines look like threads. The rough background mimics cloth.

I need help with a kenmore 158 presser foot lever and top pressure bar. Any videos in the 158 series?

Fantastic video. Thank you. I have a Kingston, turquoise that I dearly love. I’ve owned it since 1979 and it’s my main sewing machine.

Most helpful. Thank you.

I wish I could find a Japanese clone free arm with a zigzag and straight stitch only all metal like a post war HA1 style

I really enjoy your informative presentations of the vintage machines and suggestions for their care and preservation. Recently we were given a 1904 Model 27 treadle machine. As per your suggestions and tip I was able to clean, lube, and have the machine working again. The finish is somewhere between good to fair condition. The decals are quite intricate, being of the Egyptian theme design. My question is can the lacquer be rejuvinated/restored? Part of the lacquer on the back side of the machine has become cloudy and yellowed thus hiding some of the details of the decals. I have considered using a very fine polishing compound to try and eliminate the cloudiness. Sewing machine oil didn't really help much.

I cringe when I see a machine stripped for repainting.

Is there lead in the black paint?

Tq for yr sharing We need yr coaching

my Mom had one when I was little......... wonder if it is in her attic? I need to look and see. would love to have it up and running.

Can you tell m if the electric motor on a singer 7256 Fashion mate is brushless or if it ha brush’s?

The "K" models were manufactured at Clydebank in Scotland, the factory was positioned a few hundred metres North of the famous John Brown & Co. Shipyard, a yard which manufactured the largest and fastest ships in the world - including the RMS Queen Mary, HMS Hood and the RMS Lusitania.

I have my mom's 401A Singer Sewing Machine. While cleaning, I put white lithium grease on the gears. After doing this, I heard it will get hard eventually and be very hard to clean the gears. I bought clear grease but need advice on cleaning off the white grease first. Thank you for your help.

Hi, I just got a vintage Singer 27, foot pedal type, no motor. Can you help me?

some people don't hav3 the pedal

Where would one get that little metal protrusion at the bottom that attaches the foot pedal? Mine is missing 😅

I can confirm as a person who works with metal parts in analytical instuments Mothers polish is amazing. However, it does not matter how clean you think it is the mothers will pull off dirt and oxidation forever........ you have to knkw when to say when

عندي مثلها انها جد روعه

A friend gave me a sewing cabinet that didn't have the machine any longer. I modified it to fit the Singer 301A cradle. The keyhole style hinges fit in the right spots, but the opening needed to be modified for the cradle. It appears it was made for a smaller machine with a wood flap covering the opening to the right side. When doing this I found the number 200 stamped inside. It has a oval shaped storage cubby inside a front door and 3 spool pins for thread. It has nipped corners that I have never seen before. Is there any tell tell signs to know that it is a Singer table vs. Necchi or something else?

Thank you so much. I finally hauled out my Mom's White and can't find the manual and couldn't remember how to thread it but with your video it came right back to me just like riding a bike. Excellent video. Do you have more explaining the knobs and buttons?

I just got this model but in a cream model. It was gifted to me and has been sitting for a while. How do I go into taking it apart and giving it life again

what year and model is this ?

Why does my thread keep breaking

Hello! Thanks for a very informative video. I recently purchased a real one with the cabinet in this video number 43. I have the original receipt from singer. You have an email address that I could send it to you. I think it would be an interesting read. Greetings from Canada!

Can you replaced a motor like this with a new motor that is "BELTED?" And if so, what type of wheel could you use? A singer 66 wheel?

I have a 158.85 All that grease is so sad. It's so dark, it looks like 5th wheel grease on a rig.

Just found an Old Kenmore Rotary myself at the thrift and these videos are so helpful in fixing it up and bringing it back to life!

The 930 came out in early 80's

I have the same machine and need the power supply repaired. Where are you located?

I have a 1946 model which is brown. It sews perfectly. Perfect travel machine for quilters who prefer not to spend the heavyweight dollars for featherweight.

I hope you reply this comment. I am in Nigeria and getting a singer slant shank is quite difficult, do you think using an industrial presser foot would work with a singer slant shank? Mine is 93220 solid state sewing machine. Thanks

Hi! I know this video is a year old, so I hope you get this message. I have this exact machine, I am having the hardest time finding an owners manual for it. Do you happen to have one? Or maybe a copy of it?

How much bedge machine

I just bought a handcrank 99k. So excited to get it! It was not inexpensive but I am just happy to get it!

I have this exact machine and going to start learning/ using it now, needs a bit of dusting but I love it, was passed on by my husbands grandmother

I have a Kenmore mid-60s model 1751. I have 2 problems. they might be related. my feed dog control seems to be frozen in the up position. I do not see an abundance of crud but the machine was very dry. I used WD40 hoping to lose linkages. No luck after 48 hours. Would it help to use a hair dryer to maybe warm up old oil? My other problem is The stitches/inch adjustment knob moves well enough but the size of my stitches remains very small. Any hints? Kit Jenkins